Changes between Version 1 and Version 2 of TracWorkflow


Ignore:
Timestamp:
2010-06-13T20:31:26Z (14 years ago)
Author:
trac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • TracWorkflow

    v1 v2  
    1414
    1515There are some significant "warts" in this; such as accepting a ticket sets it to 'assigned' state, and assigning a ticket sets it to 'new' state.  Perfectly obvious, right?
    16 So you will probably want to migrate to "basic" workflow; `contrib/workflow/migrate_original_to_basic.py` may be helpful.
     16So you will probably want to migrate to "basic" workflow; [trac:source:trunk/contrib/workflow/migrate_original_to_basic.py contrib/workflow/migrate_original_to_basic.py] may be helpful.
    1717
    1818=== Environments created with 0.11 ===
     
    2525== Additional Ticket Workflows ==
    2626
    27 There are several example workflows provided in the Trac source tree; look in `contrib/workflow` for `.ini` config sections.  One of those may be a good match for what you want. They can be pasted into the `[ticket-workflow]` section of your `trac.ini` file.
     27There are several example workflows provided in the Trac source tree; look in [trac:source:trunk/contrib/workflow contrib/workflow] for `.ini` config sections.  One of those may be a good match for what you want. They can be pasted into the `[ticket-workflow]` section of your `trac.ini` file. However if you have existing tickets then there may be issues if those tickets have states that are not in the new workflow.
     28
     29Here are some [http://trac.edgewall.org/wiki/WorkFlow/Examples diagrams] of the above examples.
    2830
    2931== Basic Ticket Workflow Customization ==
     32
     33Note: Ticket "statuses" or "states" are not separately defined. The states a ticket can be in are automatically generated by the transitions defined in a workflow. Therefore, creating a new ticket state simply requires defining a state transition in the workflow that starts or ends with that state.
    3034
    3135Create a `[ticket-workflow]` section in `trac.ini`.
     
    9094And then open up the resulting `trac.pdf` file created by the script (it will be in the same directory as the `trac.ini` file).
    9195
     96An online copy of the workflow parser is available at http://foss.wush.net/cgi-bin/visual-workflow.pl
     97
    9298After you have changed a workflow, you need to restart apache for the changes to take effect. This is important, because the changes will still show up when you run your script, but all the old workflow steps will still be there until the server is restarted.
    9399
     100== Example: Adding optional Testing with Workflow ==
     101
     102By adding the following to your [ticket-workflow] section of trac.ini you get optional testing.  When the ticket is in new, accepted or needs_work status you can choose to submit it for testing.  When it's in the testing status the user gets the option to reject it and send it back to needs_work, or pass the testing and send it along to closed.  If they accept it then it gets automatically marked as closed and the resolution is set to fixed.  Since all the old work flow remains, a ticket can skip this entire section.
     103
     104{{{
     105testing = new,accepted,needs_work,assigned,reopened -> testing
     106testing.name = Submit to reporter for testing
     107testing.permissions = TICKET_MODIFY
     108
     109reject = testing -> needs_work
     110reject.name = Failed testing, return to developer
     111
     112pass = testing -> closed
     113pass.name = Passes Testing
     114pass.operations = set_resolution
     115pass.set_resolution = fixed
     116}}}
     117
     118=== How to combine the `tracopt.ticket.commit_updater` with the testing workflow ===
     119
     120The [[source:trunk/tracopt/ticket/commit_updater.py|tracopt.ticket.commit_updater]] is the optional component that [[TracRepositoryAdmin#trac-post-commit-hook|replaces the old trac-post-commit-hook]], in Trac 0.12.
     121
     122By default it reacts on some keywords found in changeset message logs like ''close'', ''fix'' etc. and performs the corresponding workflow action.
     123
     124If you have a more complex workflow, like the testing stage described above and you want the ''closes'' keyword to move the ticket to the ''testing'' status instead of the ''closed'' status, you need to adapt the code a bit.
     125
     126Have a look at the [[0.11/TracWorkflow#How-ToCombineSVNtrac-post-commit-hookWithTestWorkflow|Trac 0.11 recipe]] for the `trac-post-commit-hook`, this will give you some ideas about how to modify the component.
     127
     128== Example: Add simple optional generic review state ==
     129
     130Sometimes Trac is used in situations where "testing" can mean different things to different people so you may want to create an optional workflow state that is between the default workflow's `assigned` and `closed` states, but does not impose implementation-specific details. The only new state you need to add for this is a `reviewing` state. A ticket may then be "submitted for review" from any state that it can be reassigned. If a review passes, you can re-use the `resolve` action to close the ticket, and if it fails you can re-use the `reassign` action to push it back into the normal workflow.
     131
     132The new `reviewing` state along with its associated `review` action looks like this:
     133
     134{{{
     135review = new,assigned,reopened -> reviewing
     136review.operations = set_owner
     137review.permissions = TICKET_MODIFY
     138}}}
     139
     140Then, to integrate this with the default Trac 0.11 workflow, you also need to add the `reviewing` state to the `accept` and `resolve` actions, like so:
     141
     142{{{
     143accept = new,reviewing -> assigned
     144[…]
     145resolve = new,assigned,reopened,reviewing -> closed
     146}}}
     147
     148Optionally, you can also add a new action that allows you to change the ticket's owner without moving the ticket out of the `reviewing` state. This enables you to reassign review work without pushing the ticket back to the `new` status.
     149
     150{{{
     151reassign_reviewing = reviewing -> *
     152reassign_reviewing.name = reassign review
     153reassign_reviewing.operations = set_owner
     154reassign_reviewing.permissions = TICKET_MODIFY
     155}}}
     156
     157The full `[ticket-workflow]` configuration will thus look like this:
     158
     159{{{
     160[ticket-workflow]
     161accept = new,reviewing -> assigned
     162accept.operations = set_owner_to_self
     163accept.permissions = TICKET_MODIFY
     164leave = * -> *
     165leave.default = 1
     166leave.operations = leave_status
     167reassign = new,assigned,reopened -> new
     168reassign.operations = set_owner
     169reassign.permissions = TICKET_MODIFY
     170reopen = closed -> reopened
     171reopen.operations = del_resolution
     172reopen.permissions = TICKET_CREATE
     173resolve = new,assigned,reopened,reviewing -> closed
     174resolve.operations = set_resolution
     175resolve.permissions = TICKET_MODIFY
     176review = new,assigned,reopened -> reviewing
     177review.operations = set_owner
     178review.permissions = TICKET_MODIFY
     179reassign_reviewing = reviewing -> *
     180reassign_reviewing.operations = set_owner
     181reassign_reviewing.name = reassign review
     182reassign_reviewing.permissions = TICKET_MODIFY
     183}}}
     184
     185== Example: Limit the resolution options for a new ticket ==
     186
     187The above resolve_new operation allows you to set the possible resolutions for a new ticket.  By modifying the existing resolve action and removing the new status from before the `->` we then get two resolve actions.  One with limited resolutions for new tickets, and then the regular one once a ticket is accepted.
     188
     189{{{
     190resolve_new = new -> closed
     191resolve_new.name = resolve
     192resolve_new.operations = set_resolution
     193resolve_new.permissions = TICKET_MODIFY
     194resolve_new.set_resolution = invalid,wontfix,duplicate
     195
     196resolve = assigned,accepted,reopened -> closed
     197resolve.operations = set_resolution
     198resolve.permissions = TICKET_MODIFY
     199}}}
     200
    94201== Advanced Ticket Workflow Customization ==
    95202
    96 If the customization above is not extensive enough for your needs, you can extend the workflow using plugins.  These plugins can provide additional operations for the workflow (like code_review), or implement side-effects for an action (such as triggering a build) that may not be merely simple state changes.  Look at `sample-plugins/workflow` for a few simple examples to get started.
     203If the customization above is not extensive enough for your needs, you can extend the workflow using plugins.  These plugins can provide additional operations for the workflow (like code_review), or implement side-effects for an action (such as triggering a build) that may not be merely simple state changes.  Look at [trac:source:trunk/sample-plugins/workflow sample-plugins/workflow] for a few simple examples to get started.
    97204
    98205But if even that is not enough, you can disable the !ConfigurableTicketWorkflow component and create a plugin that completely replaces it.
    99206
     207== Adding Workflow States to Milestone Progress Bars ==
     208
     209If you add additional states to your workflow, you may want to customize your milestone progress bars as well.  See [TracIni#milestone-groups-section TracIni].
     210
     211== some ideas for next steps ==
     212
     213New enhancement ideas for the workflow system should be filed as enhancement tickets against the `ticket system` component.  If desired, add a single-line link to that ticket here.  Also look at the [th:wiki:AdvancedTicketWorkflowPlugin] as it provides experimental operations.
     214
     215If you have a response to the comments below, create an enhancement ticket, and replace the description below with a link to the ticket.
     216
     217 * the "operation" could be on the nodes, possible operations are:
     218   * '''preops''': automatic, before entering the state/activity
     219   * '''postops''': automatic, when leaving the state/activity
     220   * '''actions''': can be chosen by the owner in the list at the bottom, and/or drop-down/pop-up together with the default actions of leaving the node on one of the arrows.
     221''This appears to add complexity without adding functionality; please provide a detailed example where these additions allow something currently impossible to implement.''
     222
     223 * operations could be anything: sum up the time used for the activity, or just write some statistical fields like
     224''A workflow plugin can add an arbitrary workflow operation, so this is already possible.''
     225
     226 * set_actor should be an operation allowing to set the owner, e.g. as a "preop":
     227   * either to a role, a person
     228   * entered fix at define time, or at run time, e.g. out of a field, or select.
     229''This is either duplicating the existing `set_owner` operation, or needs to be clarified.''
     230
     231 * Actions should be selectable based on the ticket type (different Workflows for different tickets)
     232''Look into the [th:wiki:AdvancedTicketWorkflowPlugin]'s `triage` operation.''